Last active: Never Not logged in [Login - Register] Search   FAQ   Member List   Today's Posts   Stats Back to:

Service Providers Forum » Leak Detectors Forum » jandy valves » Reply

Post Reply Who Can Post? All users can post new topics and all users can reply. Username   Need to register? Password:   Forgot password? Subject: (optional) Icon: Formatting Mode: Normal Advanced Help Andale Mono Arial Arial Black Book Antiqua Century Gothic Comic Sans MS Courier New Georgia Impact Tahoma Times New Roman Trebuchet MS Script MT Bold Stencil Verdana Lucida Console -2 -1 1 2 3 4 5 6 White Black Red Yellow Pink Green Orange Purple Blue Beige Brown Teal Navy Maroon LimeGreen Message: HTML is Off Smilies are On BB Code is On [img] Code is On [quote][i]Originally posted by Semi_Retired[/i] [quote][i]Originally posted by kadavis[/i] best plug system to use on 2" x 1-1/2" jandy valves [/quote] It worked like a charm. Fit through the inch and a half port with that restrictive ridge and past the two inch 90 and past the opening of the spa bypass tee. [/quote] Disable Smilies? Use signature? Turn BBCode off? Receive email on reply? Attachment:

Topic Review cgg90210  posted on 5-11-12 at 10:50 PM Semi_Retired  posted on 11-9-12 at 10:07 PM Quote: Originally posted by kadavis best plug system to use on 2" x 1-1/2" jandy valves It worked like a charm. Fit through the inch and a half port with that restrictive ridge and past the two inch 90 and past the opening of the spa bypass tee. ChuckGeo  posted on 31-8-12 at 11:43 AM After disassembling the valve, a #145 plug will fit in a port that is pliumbed in 1 1/2" PVC. If you need to plug a 2" port, a #152 should work, if it's too loose use a #155. When testing to Jandy valves try to get your test pressure on the backside of the wafer seal as they are prone to leaking if you test against the front of the wafer seal. cgg90210  posted on 27-8-12 at 08:56 PM It' not 100%, but you can usually pressure test against Jandy Valves. If you have a pressure drop, listen in the equip. area or remove the pot lid to see if water is moving. If the valve is by-passing, plug all of the common pipes(suction or return) and plug the pump. If all common pipes are plugged, suction, return and jets are seperated and pipe holds pressure, no leaky. Saves some time taking apart 8 screws, actuaters and using blow-ups that always blow out under higher pressure. Semi_Retired  posted on 15-8-12 at 06:40 AM Remove the cap and diverter. Slide a 2" inflatable with a hose extender through the valve and down the pipe. Inflate. If you need to infuse, an open plug with a 90 will seal inside the valve. Brian QuickLeakCheck.com PoolRepairsOnly.org kadavis  posted on 14-8-12 at 08:31 PM best plug system to use on 2" x 1-1/2" jandy valves

Service Providers Forum  » Leak Detectors Forum » jandy valves » Reply

Powered by XMB Developed By Aventure Media & The XMB Group © 2002-2006 [queries: 17] [PHP: 76.0% - SQL: 24.0%]